:: Home

:: Products

:: Sell Offers

:: Profile

:: Contact Us

PID 500

 

The PID500 controller accepts signals from a variety of

temperature sensors (thermocouple or RTD elements)

and 4 to 20 mA or 0 to 10 VDC signals. It precisely

displays the process temperature, and provides the

appropriate output control signal to maintain the process

accurately at the desired temperature.

The controller operates in the PID control mode for both

heating and cooling, with on-demand auto-tune, which

will establish the tuning constants. The PID tuning

constants may be fine-tuned by the operator at any time

and then locked from further modification. The controller

employs a unique overshoot suppression feature, which

allows the quickest response without excessive

overshoot. The controller may also be programmed to

operate in the ON/OFF control mode with adjustable

hysteresis.

 

 

FEATURES

! Compact Size : 1/16 DIN

! Dual LED displays for simultaneous indication of

process temperature and set point (Lower display

selectable for Set1, Set 2, Set 3, % output, Ramp

o o set point C / F etc)

! Universal input - accepts sensor inputs

(thermocouple or RTD), Current: 0 to 20 mA, 4 to 20

mA, Voltage: 0 to 10 VDC.

! Zone PID.

! PID control with reduced overshoot

! On demand Auto-tuning of PID control settings

! Relay 2 programmable as Heat / Cool / Alarm

! Heat - Cool PID algorithm

! Single point ramp-soak algorithm

! Auto / manual mode

! Soft Start ( Set point ramping for process startup)

! 85 to 270 VAC supply voltage (also available 24

VAC/DC models)

! Digital Filtering: 0 to 99 sec

! High indication accuracy: ±0.25%

! Sensor Error Compensation (offset)

! Sensor Break Detection

! Status indicators for outputs

! Parameter security via programmable lockouts

! IP66 bezel

! Compliance: CE, UL, RoHS

OPTIONAL FEATURES

! Extra Alarm Output (Relay 3)

! Heater Current Monitor and Heater Break Alarm

! Linear DC Outputs (0 to 10 V, 0 to 20mA, 4 to 20

mA)

! Remote set point input (4 to 20 mA)

! Motorized input.

! RS-485 serial communication ( PC Software

available for controller configuration)

! 18 VDC output to drive SSR

! 24 VAC /DC supply voltage models

 

PID 110/130

 

FEATURES

! Standard Sizes: 1/4 DIN ; 1/8 DIN

! Dual LED displays for simultaneous indication of process

temperature and set point (Lower display selectable for

o o Set1, Set 2, Set 3, % output, Ramp set point C / F etc)

! Universal input - accepts sensor inputs (thermocouple or

RTD), Current: 0 - 20mA, 4 - 20mA, Voltage: 0 - 10VDC.

! Zone PID.

! PID control with reduced overshoot

! On demand Auto-tuning of PID control settings

! Relay 2 can be programmed as Heat / Cool / Alarm

! Heat - Cool PID algorithm

! Single point ramp-soak algorithm

! Auto / manual mode

! Soft Start ( Set point Ramping for Process Startup)

! 85 to 270 VAC supply voltage

! Digital Filtering: 0 to 99 sec

! High indication accuracy: ±0.25%

! Sensor Error Compensation (offset)

! Sensor Break Detection

! Status indicators for outputs

! Parameter security via programmable lockouts

! Compliance: CE, RoHS

OPTIONAL FEATURES

! Extra Alarm Output (Relay 3)

! Linear DC Outputs (0 to 10 V, 0 to 20mA, 4 to 20 mA)

! 18 VDC output to drive SSR

! 24 VAC /DC supply voltage models - (Consult factory)

DESCRIPTION

The PID controller accepts signals from a variety of temperature

sensors (thermocouple or RTD elements) and 4 to 20 mA or 0 to 10

VDC signals. It precisely displays the process temperature and

provides the appropriate output control signal to maintain the

process accurately at the desired temperature.

The controller operates in the PID control mode for both heating

and cooling with on-demand auto-tune, which will establish the

tuning constants. The PID tuning constants may be fine-tuned by

the operator at any time and then locked from further modification.

The controller employs a unique overshoot suppression feature,

which allows quick response without excessive overshoot. The

controller may also be programmed to operate in the ON/OFF

control mode with adjustable hysteresis.

 

PID 528

 

FEATURES

! Compact Size: 1/16 Din

! Dual LED Displays for simultaneous indication of

Process temperature and Set Point

! PID control with reduced overshoot

! On demand Auto-tuning of PID Control Settings

! 85 to 270 VAC / DC Supply Voltage (also available

24 VAC/DC models)

! Accepts Sensor Inputs (thermocouple or RTD)

! High Indication Accuracy: ±0.25%

! Sensor error compensation (offset) and Break

Detection

! Status Indicators for Outputs

! Compliance: CE, UL, RoHS

OPTIONAL FEATURES

! 18 VDC Output to drive SSR

 

PID 513

 

FEATURES

! Auto tuning PID function.

! Compact size (1/16 DIN).

! High indication accuracy: ±0.25%.

! Selectable sensor (J, K & PT100).

! High rating 10 Amp relay.

! Universal supply voltage: 85 to 270 VAC/DC.

! Optional against order:

24 VAC/DC supply (for PID513 only).

12 VDC output to drive SSR

 

TC 523/518

 

FEATURES

! Compact Size: 1/16 Din

! TC523- 3 digit; TC518- 4+4 digit

! PID Control with reduced overshoot

! Auto-tuning

! 85 to 270 VAC Supply Voltage (also available 24

VAC/DC models consult factory)

o o ! C / F selectable

! Accepts sensor inputs (thermocouple or RTD)

! High Indication Accuracy: ±0.25%

! Sensor Error Compensation (offset) and Break

Detection

! Setpoint lock

! Compliance: CE, RoHS

Industrial Supplies-General (1)

Industrial Tools (1)

Industrial Automation (9)